Made in
England
Hand-held
Bag-holders
tel. / fax.
01902 674444
BLP4
Loader
Part No. Description / Specification:
B05DL98 = Model 5, D-shaped Lift-in bag support frame of 98cm. internal perimeter providing
an opening 25cm. wide x 30cm. deep. The channel section of the support frame
is made of extruded uPVC; the injection moulded hand-hold is of ASA polymer.
Frame weight 150g. The bag retainer tube is thermo plastic rubber weight 170g.
Assembled weight 325g. Accepts bags / sacks of neck width 50cm.+.
B05DL110 = Model 5, D-shaped Lift-in bag support frame of 110cm.internal perimeter providing
an opening 33cm.wide x 30cm. deep. The channel section of the support frame is
made of extruded uPVC; the injection moulded hand-hold is of ASA polymer.
Frame weight: 160g. The bag retainer tube is extruded thermo plastic rubber of
weight 190g. Assembled weight 350g. Accepts bags / sacks of neck width 60cm.+.
B0_._S11_ = Sweep-in Plate of 385mm. overall width with retainer elastomer retainer tube.
Plate material: ABS (injection moulded). Retainer tube material: plastic elastomer.
Weight: 300g. (Sweep-plate+tube)
B06D_11_ = Model 6, heavy duty uPVC, D-shaped, bag support frame 110cm. circumference.
It can be substituted for the standard frame and offers greater rigidity, strength and
life; it is however heaver and considerably more costly to make. Weight: 220g.
Accepts bags: neck width 60cm.+
B06D_11E = This is the same heavy-duty-rigid D-shaped bag support frame as above but has
riveted to it a pair a white powder coated aluminium dog-leg-tubes onto which a
height adjustable Extension handle is fitted. Weight of frame with handle 610g.
Weight complete with Sweep plate+ bag = 900g. Accepts bags: neck width 60cm.+
BLP1 = Litter Plier handle assembly. Scissor style, thumb operated and spring loaded to
the open position by an internal stainless steel torsion spring. The handle halves
pivot on an M5 bolt that rotates in brass inserts moulded into the handle halves.
Lateral movement of the handle halves relies on close control of their opposing
68mm. diameter bearing faces which are separated by a Nylon-PTFE-Nylon
face-washer sandwich, the nylon-PTFE interface being the wearing element.
Sockets, with M4 screw clamping, provide for a pair of tubular legs.
This model has taper-lock sockets for extension handles.
Handle moulding material: ABS > ASA polymer. Handle assembly weight = 350g.
BLP2 = Litter Plier with large Angled handle. Multi-finger operated it is spring loaded to the
open position by an internal stainless steel torsion spring. It is internally controlled
as BLP1 (above) but has no provision for extension handles. It uses an M5x50bolt.
Handles plastic moulding material: ABS polymer. Handle assembly weight = 320g.
BLP3 = Litter Plier of slimline lightweight angled handle design. Multi-finger operated it is
spring loaded to the open position by an internal stainless steel torsion spring.
It has a 50mm. diameter bearing face and pivots on an M5x 35mm.bolt running in
brass bushes. Moulded in ABS/ASA polymer handle assembly weight = 220-240g.
(complete weight of a BLP3-80A.GT2 Litter Plier = 390/400g.)
BLP4 = Litter Plier handle assembly. Mid-size Angled-handle, spring loaded to the open
position by an internal stainless steel torsion spring. The handle halves pivot on
an M5 stainless-steel bolt rotating in brass inserts moulded in the handle halves.
Lateral movement of the handle halves is controlled by their opposing 60mm.
diameter bearing faces. A Nylon-PTFE-Nylon face washer pack is sandwiched
between them, the nylon-PTFE interface being the bearing wearing element.
Sockets with M3 screw clamping provide for a pair of tubular legs.
Handles moulding material: ABS > ASA polymer. Handle assembly weight = 250g.
(complete weight of a BLP4-85A.GT2 Litter Plier = 400/420g.)
Current Litter Plier tubes are 16.0mm. outside diameter x 0.8mm.wall of weight 100g./m.
Cut lengths as follows:-
BLP___50 = Mini Litter Plier / short-Poop-SCoop tube length = 330mm. A
BLP___65 = Short Litter Plier tube length = 497mm. A & G
BLP___80 = Standard Litter Plier tube length = 568mm. A & G
BLP___85 = Long Litter Plier tube length = 620mm. A & G
BLP___90 = XL Litter Plier tube length = 663mm. A
BLP___95 = XXL Litter Plier tube length = 720mm. A
BLP___97 = XXL Litter Plier tube length = 750mm. C
BLP__100 = 800mm. tube length aluminium or carbon fibre.
BLP__120 = 997mm. tube length aluminium or Carbon fibre.
A/C/G A = Aluminium 5083 H185 (std.) ; C = Carbon fibre ; G= Glass fibre, max.length 620mm.
BLP1_.G1 = The 1st-gripper we made (chubby). Socket+riveted to tube. Material: polyurethane.
BLP1_.G1I= Current 32mm.wide asymmetric gripper pair secured with M3 screw+nut. Matl: PU.
BLP2_.G2 = A well liked tip-toe-gripper most associated with BLP2 Material: polyurethane
BLP__.G3 = A cup-shape-gripper with a large contact area. Special fitment only.
BLP__.GT = A chisel edge gripper now super-ceded by .GT2; Material Polyurethane wt.16g.ea.
BLP__.GT2=New chisel edge gripper with better Litter-pull and bottle glass grip.(Polyurethane)
BLP__.GSX= A mini-gripper-shovel of 60mm.width. Material: Glass filled nylon.
BLP__.SC = Scoop mainly used for dog poop 110m.width. Material: ABS moving to ASA polymer.
BLP__.SP = Spade plier ends moulded in Nylon6 these fit on a tube with a flat screwdriver like
end on the end and are best supplied already fitted to the tubes.
